G.Skill

G.Skill Trident Z RGB (For AMD) DDR4 RAM 32 GB (2 × 16 GB) 3200 MT/s

The G.Skill Trident Z RGB (For AMD) is a DDR4 memory kit with RGB lighting for desktop PCs, made up of two 16 GB modules. It brings 32 GB in total at 3200 MT/s and 1.35 V, in a version aimed at AMD platforms for builders who want light in the case and smoother running in games.

  • Type: DDR4 desktop module, non-ECC, unbuffered
  • Capacity and kit: 32 GB, 2 × 16 GB
  • Speed: 3200 MT/s (listed by the manufacturer as 3200 MHz)
  • Voltage: 1.35 V
  • Version: For AMD platforms
  • Lighting: RGB

Description

32 GB that leaves room for games and the desktop

Two 16 GB modules add up to 32 GB of memory. That is enough for current games alongside streaming and a chat app, as well as photo editing, virtual machines and dozens of browser tabs. When memory does not run out, Windows does not have to move data to the slower drive and the PC does not start to stutter under load.

3200 MT/s and dual-channel mode

A speed of 3200 MT/s is a common and balanced choice for DDR4. The manufacturer writes it as 3200 MHz, which for DDR4 means the same thing. Because the kit contains two identical modules, the motherboard can use two memory channels at once; bandwidth is clearly higher than with one module, so the processor and integrated graphics get their data faster.

RGB lighting for a glass-sided case

The RGB in the model name means the modules carry coloured lighting, which shapes the look of a build behind a glass side panel. The manufacturer data does not say how the lighting is controlled or which motherboard software it syncs with. The lighting has no effect on memory speed; it is purely about appearance.

1.35 V and switching on the rated speed

At 1.35 V the voltage is above the DDR4 baseline, so 3200 MT/s is a factory-stored profile rather than the base mode. After installation the memory may start more slowly; the full speed is enabled in the memory settings of the motherboard BIOS. The modules are non-ECC and unbuffered, which is what ordinary desktop motherboards expect.

Installed in a few minutes

Swapping memory only takes opening the case. Shut the computer down, unplug the power cable and touch a metal part of the case before handling the modules to discharge static. Fit the modules into the slots marked in the motherboard manual and press until the latches click. If the system shows 32 GB after booting, open BIOS and select the stored profile to get 3200 MT/s.

Who this RAM is for

Owners of an AMD-based desktop who need to move up to 32 GB; builders putting together a system with coloured lighting in a glass-sided case; and gamers replacing two odd modules with one matched kit so that dual-channel mode works straight away. It also fits anyone who wants to give an older AMD system more memory without replacing the motherboard and processor.

Specifications

General

BrandG.Skill
Component forPC/server
ECCNo
RegisteredNo
EAN4713294220615

Memory

Internal memory typeDDR4
Memory clock speed3200 MHz
Memory layout (modules x size)2 x 16 GB

Storage

Capacity32 Kit (16GBx2) GB

Battery & power

Memory voltage1.35 V

Dimensions & weight

Net weight0.15 kg

Questions & answers

How does this version differ from the regular Trident Z RGB?

The name carries the For AMD label, showing that the kit is aimed at AMD platforms. In the manufacturer data both versions share the same capacity, speed and voltage; no difference in timings or profile is listed.

Will this memory fit a laptop?

No. The manufacturer lists it as a PC/server component; these are full-size desktop modules. Laptops use shorter SO-DIMM modules or soldered memory.

Is it suitable for a server?

Not for a typical server that requires ECC or registered memory. According to the manufacturer, these modules are non-ECC and unregistered, meant for consumer and gaming motherboards.

Why does the memory run below 3200 MT/s after installation?

The overclocking profile usually does not switch on by itself. Open the motherboard BIOS and select the stored profile in the memory settings; the kit will then run at 3200 MT/s and 1.35 V, if the board supports it.

Reviews

No reviews yet

Bought this product? Be the first to share your experience.

Write a review

Only verified buyers can leave reviews.