The Prime series stands out with three Axial-tech fans that spread airflow across the whole 304 mm heatsink. Compared with shorter twin-fan cards there is more cooling surface, which means the same amount of heat can be removed at lower fan speeds. The cooler is 2.5 slots thick, so there is still room below the card in the case for other expansion cards.
The NVIDIA GeForce RTX 5060 Ti GPU has 4608 CUDA cores. ASUS has raised the clocks of the Prime version at the factory: the boost clock is 2617 MHz, and 2647 MHz in OC mode. The CUDA cores accelerate games as well as video, 3D and AI applications that use CUDA. The card connects to the motherboard over PCI Express 5.0 and supports OpenGL 4.6.
16 GB of GDDR7 video memory on a 128-bit bus at 28 Gbit/s leaves room for high-resolution textures and complex scenes. The manufacturer lists the card as VR ready, so it also works for gaming with virtual reality headsets. The large memory pool is useful for AI tools and video editing too, which keep their data in graphics card memory.
Three DisplayPort 2.1b outputs and one HDMI 2.1b support up to four displays at once and resolutions up to 7680 × 4320. NVIDIA G-SYNC synchronises the refresh rate of a G-SYNC monitor with the frame rate of the card, so the image does not tear. HDCP 2.3 support means protected streaming content plays at high resolution, and Windows support is listed in the manufacturer data.
The card measures 304 × 120 × 50 mm and weighs 898 g; it is a full-height, full-length (FH/FL) design. Although it carries the SFF-Ready Enthusiast GeForce badge, its length is 304 mm, so check the graphics card clearance of your case before installing. Supplementary power comes through a single 8-pin connector, and ASUS recommends a power supply of at least 550 W.
Gamers who want 16 GB of memory and triple-fan cooling and whose case takes a 304 mm card; VR players; creators whose video, 3D or AI work uses CUDA and needs plenty of video memory; and owners of a G-SYNC monitor.
| Brand | ASUS |
|---|---|
| Form factor | Full-Height/Full-Length (FH/FL) |
| Product colour | Multicolour |
| CUDA | Yes |
| HDCP | Yes |
| SFF ready | Yes |
| HDCP version | 2.3 |
| NVIDIA G-SYNC | Yes |
| Interface type | PCI Express 5.0 |
| Number of fans | 3 |
| OpenGL version | 4.6 |
| Number of slots | 2.5 |
| Data transfer rate | 28 |
| Virtual Reality (VR) ready | Yes |
| EAN | 4711387994054 |
| Maximum resolution | 7680 x 4320 |
|---|
| CUDA cores | 4608 |
|---|---|
| Stream processors | 4 |
| NPU performance up to | 759 |
| Processor boost clock speed | 2617 |
| Processor frequency (OC mode) | 2647 |
| Memory bus | 128 |
|---|
| Discrete graphics card memory | 16 GB |
|---|---|
| Graphics processor | GeForce RTX 5060 Ti |
| Graphics card memory type | GDDR7 |
| Graphics processor family | NVIDIA |
| Maximum displays per videocard | 4 |
| HDMI ports quantity | 1 |
|---|---|
| HDMI version | 2.1b |
| Dual Link DVI | No |
| DisplayPort version | 2.1b |
| DisplayPorts quantity | 3 |
| Supplementary power connectors | 1x 8-pin |
| Windows operating systems supported | Yes |
|---|
| Minimum system power supply | 550 |
|---|
| Cooling type | Active |
|---|---|
| Cooling technology | ASUS Axial-tech |
| Package type | Box |
|---|---|
| Parallel processing technology support | Not supported |
| Depth | 50 mm |
|---|---|
| Height | 120 mm |
| Weight | 898 g |
| Product Net Weight | 0.7 kg |
| Length | 304 |
The card is 304 mm long, 120 mm tall and 50 mm thick (2.5 slots). Compare these figures with the graphics card clearance of your case.
ASUS recommends a power supply of at least 550 W. The card needs one 8-pin PCIe power cable.
The Prime has three fans and is 304 mm long, with clocks of 2617 MHz (boost) and 2647 MHz (OC mode). The Dual has two fans, is 229 mm long and runs at 2602 / 2632 MHz. The GPU and the 16 GB of GDDR7 memory are the same.
Yes, the manufacturer lists the card as VR ready.
Bought this product? Be the first to share your experience.
Write a reviewOnly verified buyers can leave reviews.