SYNOLOGY

Synology RS422+ 1U rackmount NAS, 4 bays, AMD Ryzen R1600, 2 GB ECC

The Synology RS422+ is a four-bay NAS in a compact 1U rackmount chassis for small businesses and home labs. An AMD Ryzen R1600 processor, 2 GB of ECC memory and the DSM operating system handle file sharing, sync, backup and surveillance, and a 10GbE module can be added next to the two gigabit ports.

  • Drive bays: 4 × 2.5″/3.5″ SATA (HDD and SSD), hot-swappable
  • Processor: AMD Ryzen Embedded R1600, 2 cores / 4 threads, 2.6–3.1 GHz
  • Memory: 2 GB DDR4 ECC
  • Network: 2 × 1GbE RJ-45, slot for the E10G22-T1-Mini 10GbE module
  • Ports: 1 × USB 3.2 Gen 1 Type-A, console port
  • RAID: 0, 1, 5, 6, 10, JBOD; no drives included
  • Chassis: 1U, 430.5 × 295.5 × 44 mm, 4.38 kg

Description

A low 1U chassis that fits a tight rack

The chassis is just 44 mm tall, one rack unit, 430.5 mm wide and 295.5 mm deep, or 327.5 mm including the handles. According to Synology it fits a two-post or wall-mount rack, so there is no need to invest in costly rail kits. Three 40 mm fans provide active cooling, the operating range is 0–35 °C and the unit weighs 4.38 kg.

Ryzen Embedded R1600 with ECC memory

The dual-core, four-thread AMD Ryzen Embedded R1600 runs at 2.6 GHz and boosts up to 3.1 GHz. Its 2 GB of DDR4 memory is ECC, which detects and corrects memory errors before they can corrupt stored files. In the manufacturer measurements, sequential throughput reaches 601 MB/s read and 516 MB/s write.

Two gigabit ports and an easy route to 10GbE

The two 1GbE RJ-45 ports support failover and load balancing: if one link drops, the other carries on. For a faster network there is an easily accessible slot for the Synology E10G22-T1-Mini module, which adds a 10GbE port. Wake-on-LAN starts the NAS over the network, and the USB 3.2 Gen 1 port takes an external drive.

Four bays for hard drives and SSDs

The bays accept 2.5-inch and 3.5-inch SATA drives, both hard drives and SSDs, and they are hot-swappable. Supported RAID levels are 0, 1, 5, 6 and 10, plus JBOD. Internally DSM uses the Btrfs and ext4 file systems, and external drives formatted as exFAT, FAT32, NTFS, HFS+ or ext3 can be read as well. Drives are chosen separately.

DSM: files, backup and surveillance in one place

The NAS runs Synology DSM 7.1 and is managed in a browser (Chrome, Firefox, Edge, Safari). Supported protocols include SMB, AFP, NFS, FTP, WebDAV, CalDAV, iSCSI, SSH, SNMP and VPN (PPTP, OpenVPN, L2TP). It handles up to 2048 users and 1024 shared folders, with permissions set through ACLs. License-free backup tools and a surveillance application come with the system.

Who this NAS is for

Small businesses and branch offices with a rack or wall cabinet that need one device for file sharing, sync between locations and PC backups. Also home lab owners who want a low 1U chassis, ECC memory and the option to move to 10GbE later, and small surveillance deployments.

Specifications

General

BrandSYNOLOGY
Model nameRS422+
Product colourBlack
ECCYes
TypeNAS
Chassis typeRack (1U)
Device classHome & Home Office
Fan diameter40
Share folder1024
Number of fans3
Rack mount kitYes
Backup functionYes
Number of users2048
Operating altitude0 - 5000
Quick installation guideYes
Access Control List (ACL)Yes
Operating relative humidity (H-H)8 - 80
Share folder access right managementYes
EAN4711174724475

Processor

Processor manufacturerAMD
Processor familyRyzen Embedded
Processor generationAMD Ryzen Embedded R1000 Series
Processor modelR1600
Processor cores2
Processor threads4
Processor frequency2.6 GHz
Processor boost frequency3.1 GHz

Memory

Internal memory2 GB
Internal memory typeDDR4

Storage

Hot-swap drive baysYes
Storage drives installedNo
Storage temperature (T-T)-20 - 60
Installed storage drive typeNo
Storage drive sizes supported2.5/3.5
Supported storage drive typesHDD & SSD
Storage relative humidity (H-H)5 - 95
Number of storage drives supported4
Supported storage drive interfacesSerial ATA

Graphics

On-board graphics card modelNot available

Ports

USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
USB portYes
Ethernet LANYes
Ethernet LAN (RJ-45) ports2
Ethernet LAN data rates1000 Mbit/s
I/O portsConsole Port
Wake-on-LAN readyYes
Expansion ports quantity1

Connectivity

Supported network protocolsSMB, AFP, NFS, FTP, WebDAV, CalDAV, iSCSI, Telnet, SSH, SNMP, and VPN (PPTP, OpenVPN, L2TP)

Software & security

Operating system installedDSM
Operating system version7.1

Keyboard & controls

On/off switchYes
Reset buttonYes

Battery & power

AC input voltage100 – 240 V
AC input frequency50 – 60 Hz

Performance & capacities

Operating temperature (T-T)0 – 35 °C
RAID levels0/1/10/5/6/JBOD
Cooling typeActive

Features

Cables includedAC
LED indicatorsYes
RAID supportYes
Browser supportedGoogle Chrome, Firefox, Microsoft Edge, Safari 13 and later, and Safari (iOS 13.0 and later) on iPad, Chrome (Android 11.0 and later) on tablets
Supported file systemsBTRFS/exFAT/ext3/ext4/FAT32/HFS+/NTFS

Dimensions & weight

Width430.5 mm
Depth295.5 mm
Height44 mm
Weight4.38 kg
Product Net Weight4.38 kg

Questions & answers

Are drives included?

No, the NAS ships without drives. It takes four 2.5-inch or 3.5-inch SATA drives, either hard drives or SSDs.

Can the RS422+ connect to a 10GbE network?

Yes, with the Synology E10G22-T1-Mini network module. It goes into the dedicated slot and adds a 10GbE port; the module is not included.

Can the memory be expanded?

The unit has 2 GB of DDR4 ECC memory. The manufacturer does not specify the number of memory slots or the maximum capacity.

Does it fit a wall-mount rack?

Yes. According to Synology, the 1U chassis fits two-post and wall-mount racks. Depth is 295.5 mm, or 327.5 mm with the handles.

Which RAID levels are supported?

RAID 0, 1, 5, 6 and 10, plus JBOD. With four drives, RAID 5 protects against one drive failure and RAID 6 against two.