Ubiquiti

Ubiquiti ES-24-250W network switch 24 × 1G, PoE+, 2 × SFP, L2/L3, rackmount

The Ubiquiti ES-24-250W is a web managed 24-port network switch that powers cameras, access points and IP phones over PoE+. Alongside the gigabit RJ-45 ports it has two SFP slots for fiber links, works at layer L2/L3 and mounts in a 19″ server rack.

  • Ports: 24 × Gigabit Ethernet RJ-45 (10/100/1000), 2 × 1 Gbit/s SFP
  • PoE: PoE+ (IEEE 802.3at) and PoE (IEEE 802.3af), 250 W maximum power consumption
  • Performance: 52 Gbit/s switching capacity, 38.69 Mpps throughput, 8000-entry MAC table
  • Management: web managed, L2/L3, stackable
  • Installation: rackmount, 485.04 × 285.6 × 44.45 mm (1U)
  • Power: 100–240 V, 50/60 Hz
  • Other: activity, link and PoE LEDs, black chassis, CE, FCC, IC

Description

PoE+ that powers devices over the network cable

The switch supports IEEE 802.3af (PoE) and 802.3at (PoE+), so security cameras, Wi-Fi access points and IP phones draw power over the same cable that carries their data. There is no need to run a mains cable or find a socket near each device, which simplifies ceiling and facade installations. Maximum power consumption is 250 W; how much of that is available to PoE devices and per port is not specified separately by the manufacturer.

24 gigabit ports and two SFP slots

All 24 RJ-45 ports are Gigabit Ethernet at 10/100/1000 Mbit/s, which is plenty for computers, cameras and access points. Two 1 Gbit/s SFP slots let you link the switch over fiber to equipment in another building or on another floor, where a copper cable would run out of length. This model has no 10G support.

A managed L2/L3 switch

Unlike an unmanaged switch, the ES-24-250W is configured through a web interface. L2/L3 means it does more than forward frames: it also supports layer 3 functions used to route traffic between network segments. The switch is stackable, so several units can be handled together. The manufacturer does not publish a full feature list in the data provided.

Performance without bottlenecks

A switching capacity of 52 Gbit/s covers every port running at full speed in both directions at once, so ports do not have to wait for each other even on a busy network. Throughput of 38.69 million packets per second and an 8000-entry MAC address table are sized for networks with hundreds of devices.

A 1U chassis for the server rack

A width of 485.04 mm and a height of 44.45 mm match one unit (1U) of a 19″ rack, with a depth of 285.6 mm. The power supply is built in and runs on 100–240 V, 50/60 Hz. LEDs show link, activity and PoE status for each port, so faults are quick to find. The operating temperature range is −5 to 40 °C.

Who this network switch is for

Offices and warehouses that need to power a dozen cameras and access points from one device; schools, hotels and apartment associations where the switch lives in a server cabinet and floors are linked by fiber; and IT installers who need a web managed L2/L3 switch with 24 gigabit ports and PoE+.

Specifications

General

BrandUbiquiti
TypeRackmountable Managed PoE+ Gigabit Switch
Colour of productBlack
Form factorRackmountable
MAC address table8000 entries
Operating relative humidity (H-H)5 - 95 %
Rack mountingYes
SFP module slots quantity2
StackableY
Throughput38.69 Mpps
EAN810354022241

Storage

Switching capacity52 Gbit/s

Ports

Ethernet LAN (RJ-45) ports24
Basic switching RJ-45 Ethernet ports quantity24
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Gigabit Ethernet (copper) ports quantity24
I/O ports24xGbit Rj45, 2x1Gbps SFP
Power over Ethernet (PoE)Yes
Predominant port type1 Gbps (RJ-45)
SFP ports quantity2

Connectivity

Networking standardsIEEE 802.3af, IEEE 802.3at
POEPoE+ 802.3 at

Keyboard & controls

Switch layerL2/L3
Switch typeWeb managed

Battery & power

Power250 W Max. Power Consumption W
AC input frequency50/60 Hz
AC input voltage100-240 V
Power consumption (typical)250 W

Performance & capacities

Operating temperature (T-T)-5 - 40 °C

Features

10G supportNo
CertificationCE, FCC, IC
LED indicatorsActivity, Link, PoE

Dimensions & weight

Width48.5 cm
Height4.45 cm
Depth28.6 cm
Weight3.7 kg g
Net weight6.193 kg
Dimensions (WxDxH)485.04 x 44.45 x 285.6 mm mm

Questions & answers

How many PoE devices can the switch power?

The switch supports PoE and PoE+. The switch has a maximum power consumption of 250 W, but the manufacturer does not specify a separate PoE budget or per-port power. Plan around the consumption of the devices you connect.

Is this a managed switch?

Yes. The ES-24-250W is a web managed L2/L3 switch and it is stackable.

Can the switch be mounted in a server rack?

Yes, the chassis is rackmountable, 485.04 mm wide and 44.45 mm high, which is one unit of a 19″ cabinet.

Do the SFP slots support 10G?

No. The two SFP slots run at 1 Gbit/s, and this model has no 10G support.