Black Friday is on — deals until 30 NovemberSee the deals
MikroTik

MikroTik CCR2116-12G-4S+ router 16-core, 16 GB, 13 × 1G, 4 × SFP+ 10G

MikroTik CCR2116-12G-4S+ is a Cloud Core Router series router for internet service providers and large networks. Inside are a 16-core 2 GHz ARM processor and 16 GB of DDR4 memory, with 13 Gigabit Ethernet ports and four 10G SFP+ slots for connections. Redundant power keeps the router running even if one power supply fails.

  • Processor: Amazon Annapurna Labs Alpine AL73400, 16 cores, 2 GHz
  • Memory and storage: 16 GB DDR4, 128 MB onboard storage, 1 × M.2 slot
  • Ports: 13 × Gigabit RJ-45, 4 × 10G SFP+, 1 × RJ45 serial port
  • Software: RouterOS v7, L6 licence, L3 hardware offloading
  • Power: dual redundant power supplies, up to 72 W consumption
  • Operating temperature: −20 °C to 60 °C
  • Weight: 2.459 kg

Description

16 cores and strong single-core performance

At the heart of the router is an Amazon Annapurna Labs Alpine AL73400 processor with 16 cores running at 2 GHz. According to the manufacturer, single-core performance is at least 15% higher than on the CCR2004, the highest in the whole CCR family. Single-core performance matters most when each connection is processed separately, as with queues and traffic shaping.

A switch chip and L3 hardware offloading

The four SFP+ ports and 12 of the Gigabit ports connect to a Marvell Aldrin family switch chip, and each group of four ports has its own full-duplex link to the chip. That leaves no bottleneck between port groups, and the manufacturer promises switch-like throughput in most setups. L3 hardware offloading moves part of the routing work to the chip and leaves the processor more headroom.

10G SFP+ and a dedicated management port

The four SFP+ slots support 10-gigabit links through an optical module or a direct-attach cable, so the router can be tied to the operator line, the core switch and servers. Besides the 12 Gigabit ports running through the switch chip, a 13th Gigabit port is connected directly to the processor and intended for management. The RJ45 serial port lets you configure the device with a console cable even without network access.

Redundant power and resilience

As befits a service-provider device, the router has two redundant power supplies: if one fails, the other keeps working and the network stays up. Maximum consumption is 72 W. The operating temperature range of −20 °C to 60 °C lets the router run in a warm network cabinet as well as in a cool equipment room.

RouterOS v7, 16 GB of memory and an M.2 slot

The router runs RouterOS v7 only, with an L6 licence, the highest RouterOS licence level. The 16 GB of DDR4 memory holds large routing tables and complex firewall rule sets. Onboard storage is 128 MB, and the M.2 slot lets you add storage, for example for logs. According to the manufacturer, the 16-core CCR2116 can roughly double the performance of even the 36-core CCR1036.

Who this router is for

The manufacturer aims it at larger internet service providers running dynamic routing, large BGP sessions, complex firewall rules and quality-of-service configurations. It also fits as the edge router of a large business or data centre that needs 10G links, redundant power and a processor that does not hold back per-connection processing.

Specifications

General

BrandMikroTik
EAN4752224007919

Processor

Processor modelAL73400
CPU frequency2000 MHz

Storage

Storage capacity128 MB

Ports

Ethernet LAN (RJ-45) ports13
SFP+ ports quantity4

Software & security

Software typeRouterOS (v7 only)

Battery & power

Power consumption (max)72 W

Performance & capacities

Operating temperature (T-T)-20°C to 60°C °C

Features

Other featuresWe wanted to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU. But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading! Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip. And there is another Gigabit port connected directly to the CPU. For management purposes. Each group of 4 ports has a separate full-duplex connection to the switch chip. No bottlenecks here. You can expect switch-like throughput in most setups. The new generation of processors offers mind-blowing performance. If we look at the CCR1036 - the powerhouse with a 36 core CPU, the new CCR2116 can easily double the performance. 16 cores vs 36 cores. Double the performance. Or even more. If you are a rather large ISP, dealing with dynamic routing, massive BGPs, complex firewall rules, and intricate quality of service configurations..This is the right device for you. Combination of raw power and utility with the reliable 10G networking. And yes, like with any ISP-level device, we’ve included a dual-redundant power supply. So you have one less thing to worry about. CCR2116-12G-4S+: technology tested by time, built for the future.

Dimensions & weight

Net weight2.459 kg

Questions & answers

Does the router have redundant power?

Yes. It has two redundant power supplies, so if one fails the other keeps running. Maximum consumption is 72 W.

Which software does the router use?

The router runs RouterOS v7 only and comes with an L6 licence. Older RouterOS versions are not supported.

Is it suitable for BGP and large routing tables?

Yes, the manufacturer designed it for large service providers with dynamic routing, large BGP sessions and complex firewall rules. The 16 GB of DDR4 memory and the 16-core processor give ample headroom for that.

Are SFP+ modules included?

The manufacturer does not specify. Each SFP+ slot you use needs an optical module or a direct-attach cable.

Reviews

No reviews yet

Bought this product? Be the first to share your experience.

Write a review

Only verified buyers can leave reviews.