Black Friday is on — deals until 30 NovemberSee the deals
Thermal Grizzly

Thermal Grizzly Hydronaut thermal paste 10 ml / 26 g, 11.8 W/(m·K)

Thermal Grizzly Hydronaut is a thermal paste with a thermal conductivity of 11.8 W/(m·K) and a thermal resistance of 0.0076 K/W. The paste is not electrically conductive, and the 10 ml / 26 g syringe is enough for many applications on a processor or graphics card.

  • Thermal conductivity: 11.8 W/(m·K)
  • Amount: 10 ml / 26 g
  • Thermal resistance: 0.0076 K/W
  • Electrical conductivity: 0 pS/m, the paste does not conduct electricity
  • Viscosity: 140–190 Pa·s
  • Temperature range: −200 to +350 °C

Description

Non-conductive paste that is safe to work with

Thermal paste fills the microscopic unevenness between the processor lid and the cooler base so that heat moves from chip to cooler without air gaps. Hydronaut has a thermal conductivity of 11.8 W/(m·K), and the manufacturer states its electrical conductivity as 0 pS/m. That means if some paste accidentally reaches components next to the chip, it will not cause a short circuit. A viscosity of 140–190 Pa·s means a thick consistency that does not run off the surface.

Who this thermal paste is for

Hydronaut suits PC builders, enthusiasts and technicians who repaste several computers or renew paste regularly. At 10 ml / 26 g it holds more than the usual small syringes, so it lasts for many applications.

Specifications

BrandThermal Grizzly
TypeThermal Conductivity: 11.8 W/mk; Thermal Resistance 0,0076 K/W; Electrical Conductivity*: 0 pS/m; Viscosity: 140-190 Pas; Temperature: -200 °C / +350 °C;
Net weight0.032 kg
EAN4260711990328

Questions & answers

Is Hydronaut electrically conductive?

No. The manufacturer gives an electrical conductivity of 0 pS/m, so the paste will not cause a short even if it accidentally spreads around the chip.

What does a thermal resistance of 0.0076 K/W mean?

Thermal resistance shows how much the paste layer hinders the flow of heat. The lower the number, the smaller the temperature difference between chip and cooler; 0.0076 K/W is the value measured by the manufacturer.

How much paste should go on a processor?

A thin, even layer that covers the lid is enough. Too thick a layer worsens heat transfer. Remove all old paste before applying a new layer.